Maplifiers http://maplifiers.net/forum/ |
|
FS: Knopian Mic Stands http://maplifiers.net/forum/viewtopic.php?f=14&t=485 |
Page 1 of 1 |
Author: | knope [ Thu Sep 02, 2010 12:02 pm ] |
Post subject: | FS: Knopian Mic Stands |
Knopian Mic Stands Perfect for micing your cab with an SM57. Come in two sizes. All stands are custom built, and pic of actual custom stand is sent to customer before shipping. Most stands are made out of metal and cause a small about of vibrations to be picked up by the microphone. Due to the hard plastic build, and the "tight but not too tight to resonate" connection all mic stand vibrations are 100% ELIMINATED. [/QUOTE] maybe I'll be able to sell a few at TGP |
Author: | Devtron [ Thu Sep 02, 2010 1:04 pm ] |
Post subject: | Re: FS: Knopian Mic Stands |
You would. |
Author: | knope [ Thu Sep 02, 2010 5:30 pm ] |
Post subject: | Re: FS: Knopian Mic Stands |
I am very serious about my products.... anyone think of anything else I could add to attract my target audience? How much would you pay for one of these? Keep in mind that my supplies are very limited and only a few of these will ever be made. |
Author: | Snaxocaster [ Thu Sep 02, 2010 5:39 pm ] |
Post subject: | Re: FS: Knopian Mic Stands |
You're like the Howard Dumble of mic stands. |
Author: | knope [ Thu Sep 02, 2010 6:12 pm ] |
Post subject: | Re: FS: Knopian Mic Stands |
Maybe someone could make a serious thread about these at TGP? With a link to the post in the HCAF Spam thread? |
Author: | torgeot [ Thu Sep 02, 2010 9:54 pm ] | |||||||||
Post subject: | Re: FS: Knopian Mic Stands | |||||||||
I was thinking he is the Howard Johnson of mic stands |
Author: | Sardocasm [ Fri Sep 03, 2010 1:51 am ] |
Post subject: | Re: FS: Knopian Mic Stands |
How much? |
Author: | knope [ Fri Sep 03, 2010 3:05 am ] |
Post subject: | Re: FS: Knopian Mic Stands |
not sure... I have to divide $630 by how ever many of these I have supplies for and then add shipping |
Author: | Sardocasm [ Fri Sep 03, 2010 8:29 am ] |
Post subject: | Re: FS: Knopian Mic Stands |
I request a formal figure. |
Author: | torgeot [ Fri Sep 03, 2010 11:28 am ] |
Post subject: | Re: FS: Knopian Mic Stands |
You could offer the build it yourself option and just throw some of thise sticks and geary thingys with a hand drawn pic on a napkin to save on labor. |
Author: | Devtron [ Fri Sep 03, 2010 11:34 am ] | |||||||||
Post subject: | Re: FS: Knopian Mic Stands | |||||||||
Think Green. Go with used napkins and bits of toilet paper. |
Author: | knope [ Fri Sep 03, 2010 11:41 am ] | |||||||||
Post subject: | Re: FS: Knopian Mic Stands | |||||||||
I guess I could do that... $105 + shipping for the complete mic stand $100 + shipping for the kit and instructions (labor is cheap in PR) I'm on very limited supplies and I think I will only be able to produce 6. |
Author: | knope [ Fri Sep 03, 2010 12:05 pm ] |
Post subject: | Re: FS: Knopian Mic Stands |
In all seriousness could some one post this in TGP asking if these are worth it and good idea? If I post it it would have to be in the FS section and you have to pay to post there.... I would "accidentally" spam it but its too easy to get bant there Just trying to reach my target clientele http://acapella.harmony-central.com/sho ... st40795337 |
Author: | Sardocasm [ Mon Sep 06, 2010 1:26 am ] |
Post subject: | Re: FS: Knopian Mic Stands |
You might be able to get that price for Legos, but I don't know about K'Nex. |
Author: | GnarlySheen [ Tue Sep 07, 2010 12:23 am ] | |||||||||
Post subject: | Re: FS: Knopian Mic Stands | |||||||||
Im serious about your products too. Sell the kits for like 20 a piece. |
Author: | torgeot [ Tue Sep 07, 2010 7:46 am ] | |||||||||
Post subject: | Re: FS: Knopian Mic Stands | |||||||||
If you go with Lincoln Logs then you could mention the added tone from the pine... |
Author: | Snaxocaster [ Tue Sep 07, 2010 11:52 pm ] |
Post subject: | Re: FS: Knopian Mic Stands |
Pine Telecasters seem to have a fine reputation. |
Author: | knope [ Wed Sep 08, 2010 1:53 am ] |
Post subject: | Re: FS: Knopian Mic Stands |
Lincoln logs don't connect tightly enough to make a quality mic stand I might just actually have to sell a few now that i have a new problem to solve |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |