Maplifiers
http://maplifiers.net/forum/

Another Jet City ISO cab clip (p90s, vht)
http://maplifiers.net/forum/viewtopic.php?f=7&t=1001		 Page 1 of 1
Author:  Tussy Hole [ Thu Dec 09, 2010 12:49 am ]
Post subject:  Another Jet City ISO cab clip (p90s, vht)
I was shooting for bright jangly tones; what do you guys think of this? :beer: :huzzah: :beer:

http://www.netmusicians.org/index.php?s ... value=9006

Image
Author:  Broseidon [ Thu Dec 09, 2010 1:16 am ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
That solo tone is bossrighteous.
And that guitar is kickass.

But, there's something weird going on..?
I don't know.

Some odd reverby-ness?
I can't quite tell, on shitty laptop speakers ATM.
Author:  metalfanat1c [ Thu Dec 09, 2010 1:51 am ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
Again, sounds like it's in a tiny box.


Can you try recording with the box open?
Author:  torgeot [ Thu Dec 09, 2010 9:13 am ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
I like this. A LOT. :tu:
Author:  chris_d [ Thu Dec 09, 2010 11:03 am ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
Does sound a bit strange in the midrange to me. Not something that i think of as a characteristic of the D60 at all. I like the breakup quality, but the mids seem odd.

What kind of microphone placement options do you have inside there?

Also, i don't know anything about that speaker. What type of Eminence is it? A copy of some other speaker?

Lastly, i would really like a Newcastle Brown Ale right now. Even though it is 10:00 AM on a thursday. :huzzah: :lol:
Author:  Zozobra [ Thu Dec 09, 2010 11:34 am ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
Could you post a screen shot from a spectrum analyser (such as span) from a part of the recording? I'm interested to see how much comb filtering you're getting from all the reflections and whether or not it can be compensated for.
Author:  metalfanat1c [ Thu Dec 09, 2010 12:05 pm ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
Zozobra wrote:
Could you post a screen shot from a spectrum analyser (such as span) from a part of the recording? I'm interested to see how much comb filtering you're getting from all the reflections and whether or not it can be compensated for.


This interests me as well.
Author:  Tussy Hole [ Thu Dec 09, 2010 5:01 pm ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
Broseidon wrote:
That solo tone is bossrighteous.
And that guitar is kickass.

But, there's something weird going on..?
I don't know.

Some odd reverby-ness?
I can't quite tell, on shitty laptop speakers ATM.



THanks bud. Idk, there isn't any reverb or post eq or anything on this clip besides Ampeg SVX on the bass. You might be hearing the differences in the left and right guitar tracks from my sloppy riffing :lol:


metalfanat1c wrote:
Again, sounds like it's in a tiny box.


Can you try recording with the box open?


You think so? I don't hear that on this clip....sure I could record with the box open but that would defeat the purpose.

torgeot wrote:
I like this. A LOT. :tu:


Thanks man! I'm diggin it too.

chris_d wrote:
Does sound a bit strange in the midrange to me. Not something that i think of as a characteristic of the D60 at all. I like the breakup quality, but the mids seem odd.

What kind of microphone placement options do you have inside there?

Also, i don't know anything about that speaker. What type of Eminence is it? A copy of some other speaker?

Lastly, i would really like a Newcastle Brown Ale right now. Even though it is 10:00 AM on a thursday. :huzzah: :lol:


Hm, what characteristics do you think of when you think D60? That amp is ridiculously versatile. The spank and growl of p90's in the middle switch position is a unique sound for sure. As for mic placements it's just a gooseneck hanging inside so there are a few spots I can hit.....would be nice if the gooseneck was a bit more rigid and perhaps a little shorter though. The speaker is a 16 ohm 100 watt Jet City 12" by Eminence; that's about all I know bout it.

Zozobra wrote:
Could you post a screen shot from a spectrum analyser (such as span) from a part of the recording? I'm interested to see how much comb filtering you're getting from all the reflections and whether or not it can be compensated for.


Can you link me to a place where I can get a free one?
Author:  Zozobra [ Thu Dec 09, 2010 5:36 pm ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
Search for voxengo span
Author:  Tussy Hole [ Thu Dec 09, 2010 6:47 pm ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
Zozobra wrote:
Search for voxengo span


K. Don't really know what I'm doing but I solo'd the left guitar track and added SPAN and then hit the hold button and took a screenshot.

Image
Author:  Zozobra [ Thu Dec 09, 2010 8:11 pm ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
That's fine. I'll explain stuff when I'm not using my phone.
Author:  Zozobra [ Fri Dec 10, 2010 8:24 am ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
That shows the comb filtering in the signal. You see where there are spikes around 800-1.5 kHz? Thats comb filtering from constructive and destructive interference from the reflected signal. This is probably what is giving it a 'boxy' sound. With a bit of tweaking it can be worked with though. The DKiH EP has comb filtering all over it as we had to record it live in a room with painted walls :poop:
Author:  Tussy Hole [ Fri Dec 10, 2010 12:35 pm ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
Interesting! What should I do about it? Scoop out some of those frequencies?
Author:  metalfanat1c [ Fri Dec 10, 2010 12:42 pm ]
Post subject:  Re: Another Jet City ISO cab clip (p90s, vht)
Try to smooth the whole curve out a bit.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/